Table of Contents Table of Contents
Previous Page  194 / 398 Next Page
Information
Show Menu
Previous Page 194 / 398 Next Page
Page Background

189

Methods:

From 2012 to 2016, 52 patients underwent segmental

mandibular reconstruction with double-barrelled fibular osteosep-

tocutaneous flaps with computer-aided design/computer-aided

manufacturing technic. Preoperative computer tomographic (CT)

scans were imported into Mimics 10.01 software (Materialise,

Leuven, Belgium) for surgical planning. The double-barrelled

bone was strung with 16 mm fixation screws instead of miniplate.

63 dental implants placement were simultaneous in 30 patients

and 32 dental implants placement were in second stage in 18

patients. Postoperative CT and digital imaging were evaluated

to assess surgical accuracy using software. The pre- and post-

operative morphometric measurements were compared using the

Student

t

test.

Results:

Two flaps occurred vascular crisis postoperatively. There

was no flap necrosis. One hundred four CT scans from 52

patients who underwent partial mandibular resection were ana-

lysed. The dimensions of the double-barrelled fibula segments

after osteotomy showed no difference from the preoperative vir-

tual surgical planning (VSP). But the condylar locations showed

a disposition out of the fossa (

P

< 0.05), between VSP and post-

operative CT scans. There was no difference in implants between

VSP and postoperative CT scans.

Conclusions:

The VSP of relationship of double-barrelled fibular

is important for segmental mandible reconstruction. The benefit

of VSP was to enhance surgical accuracy and safety.

http://dx.doi.org/10.1016/j.ijom.2017.02.645

Computer-aided design/computer-aided manufacturing

versus conventional fixation methods for mandible

reconstruction: a biomechanical

in vitro

study

C. Rendenbach

∗

, L. Gerbig, G. Huber, K. Sellenschloh,

M. Morlock, R. Smeets, B. Beck-Broichsitter, M. Heiland,

H. Hanken

University Medical Center Hamburg Eppendorf and Technical

University Hamburg, Germany

Background:

There are several methods for osseous fixation

in mandible reconstruction with a trend towards computer-aided

design/computer-aided manufacturing (CAD/CAM) plates. There

a no studies comparing biomechanical aspects of conventional

plates with CAD-CAM fixation systems to date.

Objective:

The aim of this study was to determine the plate with

the highest fatigue strength.

Methods:

We designed a polyurethane mandible reconstruction

model (Synbone, CH) with cortical and cancellous equivalents.

Three different fixation systems with each six specimen were

tested. Mandible reconstruction of a right-sided two-segment

defect was performed with either miniplates (Group A), a con-

ventional 2.0 mm reconstruction plate (Group B) or an individual

CAD-CAM plate (Group C) [Depuy Synthes, Germany]. Masti-

cation was simulated via cyclic dynamic testing using a universal

testing machine (MTS, Bionix, Eden Prairie, MN). Specimens

were tested at a rate of 1 Hz with increasing load application

(+0.15 N/cycle) on the left side.

Findings:

Material failure in the miniplate group occurred at

51.920 simulated bite cycles on average (corresponding to a load of

0.56

±

0.4 kN). CADCAMand reconstruction plates failed at 0.66

and 0.65 kN on average. Material stiffness was higher (+70 N/mm)

in the CAD CAM group. Plate breakage appeared in groups A

and B, while screw breakage was recorded as failure mechanism

in Group C.

Conclusion:

All three tested fixation methods seem sufficiently

stable for mandible reconstruction. For two-segmental defects,

rigid fixation seems to be better in reconstruction plates compared

to titanium miniplates.

http://dx.doi.org/10.1016/j.ijom.2017.02.646

L

ong-term biomechanical donor site morbidity after radial

forearm free flap

C. Rendenbach

∗

, C. Kohlmeier, H. Kreiker, A.T. Assaf,

H. Hanken, A. Rashad, R. Smeets, M. Heiland, B. Riecke

University Medical Center Hamburg Eppendorf, Germany

Background:

Although the radial forearm free flap (RFFF) is

a commonly used microvascular graft for head and neck recon-

struction, long-term biomechanical results regarding donor site

morbidity are rare.

Objective:

To evaluate long-term functional outcome after RFFF.

Methods:

In a prospective study 32 patients underwent biome-

chanical assessment preoperatively, three month postoperatively

and two years postoperatively. Both the donor and the contralat-

eral arm were examined. The primary endpoint of the study was

grip strength. Further, Mayo-Wrist-score, DASH-score, finemotor

skill strengths (tip pinch, key pinch, palmar pinch) and the range of

motion were analysed. Primary defects were closed with local full-

thickness skin grafts (FTSG) from the donor site forearm avoiding

a secondary defect site.

Results:

In the long-term analysis, grip strength was reduced in

both arms. A significant improvement over timewas found only for

the donor arm. A persistent deficit of tip pinch strength and dorsal

extension was recorded. Persistent sensory limitations occurred in

4 cases. Patient satisfaction after two years of follow up was high

and daily life routine was not restricted.

Conclusion:

Gross and fine motor skill limitations are reversible

short-term effects after RFFF harvesting and do not restrict daily

routine in the long-term. These findings substantiate the value of

the RFFF as a workhorse reconstructive surgery.

http://dx.doi.org/10.1016/j.ijom.2017.02.647

Prefabrication of customised polymethylmethacrylate

implants in cranioplasty and the mechanical properties of

polymethylmethacrylate versus polyetheretherketone

A. Ridwan-Pramana

∗

, J. van Loon, N. Liberton, S. te Slaa,

F. Verver, J. Wolff, T. Forouzanfar

Department of Oral and Maxillofacial Surgery/3D Innovationlab

VU University Medical Center, Amsterdam, The Netherlands

Background:

The two most widely used implant materials in

cranioplasty are polyetheretherketone (PEEK) and polymethyl-

methacrylate (PMMA). PEEK has been used for the last two

decades in cranial surgery, due to its excellent biocompatibility,

good mechanical strength and radiographic translucency. PMMA

has a relatively low cost and has an extensive track record dat-

ing back to the 1940s. Sterilisation is a mandatory process for

materials used in medical applications like skull implants. While

sufficient strength and stiffness are important criteria that implant