34
Abstracts
Mandibular reconstruction: our experience with the use
of computer-aided design/computer-aided manufacturing
technology
C. Marchetti
University of Bologna, Bologna, Italy
Mandibular reconstruction after oncological resection presents
a challenge in maxillofacial surgery. Currently, microvascu-
lar free-flap reconstruction using bone transfer is the best
choice and computer-aided design/computer-aided manufacturing
(CAD/CAM) can be used to plan reconstructive surgery, optimis-
ing aesthetic outcomes and functional rehabilitation.
Since 2011, we performed in Sant’Orsola-Malpighi Hospital
of Bologna, Head and Neck Department, over 50 CAD/CAM-
based mandibular reconstruction procedures using vascularised
composite free flap transfers.
Every procedure follows a specific algorithm, which begins
with the acquisition of a high-resolution computed tomography
scan of craniofacial region and of the lower leg or ankle as a donor
site. Then a three-dimensional virtual model of the maxillofacial
skeleton is created.
A reconstructive bony plate is designed using the original exter-
nal cortical bone as a template reproducing the ideal mandibular
contour and ensuring the native morphology of the reconstructed
mandible. Direct-metal laser-sintering yields a patient-specific
plate devoid of errors introduced during manual modelling.
Finally the straight fibular flap is contoured to resemble a neo-
mandible using a surgical cutting guide that is virtually planned
to guide surgery on the fibular fragment, also optimising the
orientation of future implant insertion for an implant-supported
oral prostheses (CAD/CAM prosthetically guided maxillofacial
surgery).
The virtual planning of a guide for mandibular segment reposi-
tioning/osteotomies and a reconstructive plate manufactured using
direct metal laser sintering technology facilitated restoration of
mandibular function and native mandibular contour when using
microvascular free flaps.
Besides, for complex reconstruction, when more fibular angu-
lated reconstructive segments are required to repair a mandibular
defect, the CAD/CAM approach is the most useful procedure and
this reconstruction protocol offers several benefits.
Summarising, from our experience, CAD/CAM reconstruc-
tive technique appears to be a valid method to accurately restore
the preoperative morphological situation of the native mandible,
giving the surgeon advantages compared with conventional pro-
cedures in terms of better functional and aesthetic results, more
procedural control, reduced surgical time and reduced number of
complications.
http://dx.doi.org/10.1016/j.ijom.2017.02.125Double degree in oral and maxillofacial surgery — is it
necessary?
R. Martin-Granizo
Hospital Clinico San Carlos, Madrid, Spain
Nowadays, Oral and Maxillofacial Surgery (OMFS) is a consoli-
dated specialty all over the world. The spectrum of competences
varies from every continent. So, in America, Asia, Africa and
Oceania it is focused in orthognathic surgery, traumatology, clefts
and oral surgery. On the other hand, Europe, with up to 50
countries, includes cancer and reconstructive surgery, craniofa-
cial, skull base and implantology. Therefore, training in those
disciplines should come from the medical side more than from
the dentistry. However, even in Europe, no unified criteria have
been proposed and there are three ways to enter OMFS train-
ing: “Mediterranean countries” (France, Italy, Portugal, Spain
and Austria) from the medical side, “Central Europe countries”
(Germany, Netherlands, United Kingdom, Ireland, Belgium and
some eastern countries”) from the double degree, and finally some
“Scandinavian countries” (Sweden, Iceland and Denmark) from
dental side. Anyway, more than the title, what is really necessary is
to have the basic dental or medical knowledge to practice OMFS.
Unification of titles throughout the world is desirable but not a
must and double or dual degree should be advisable in case train-
ing is done at the same time, avoiding excessively long training
programmes.
http://dx.doi.org/10.1016/j.ijom.2017.02.126UVA Clinic Face Architects five steps for virtual surgical
orthognathic planning; a routine protocol for functional and
aesthetic outcomes
A. Martínez-Garza
∗
, H. Martínez-Ramírez
UVA Clinic Face Architects, Monterrey, Mexico
The “5-Step” virtual surgical orthognathic planning (VSOP) pro-
tocol, has been developed by UVA Clinic Face Architects based
on a daily clinical workflow. We describe a workup protocol for
VSOP in an office-base concept using 5 steps. The first step con-
sists of a cone-beam computed tomography (CBCT) scan of the
patient with the alignment of fiducial markers and an appropriate
calibration of the images that endorses a better surgical planning
and surgical prediction. Understanding that one of the major chal-
lenge for the clinician is to incorporate three-dimensional (3D)
imaging and virtual planning the second step consists in standar-
dising the different two-dimensional virtual plannings allowing
to integrate the “3D virtual treatment planning” in an efficient
and non-time-consuming way. The third step is to approve the
VSOP, this information is merged with the skeletal components
of the CBCT providing appropriate elements for surgical plan-
ning and fabrication of an intermediate splint by computer-aided
design/computer-aidedmanufacturing technology. The fourth step
allows us to receive the surgical splints with a technique that
eliminates the need for an additional dental model scan. This
technique forces us to perform a mandible-first sequence.
The fifth step consists in performing the surgery. This pro-
tocol provides great operative insight allowing us to improve
our planning and our intraoperative efficiency. The 5-Step
UVA Clinic Face Architects VSOP can be integrated in
a daily clinical workflow with an efficient way providing
tremendous preoperative insight anticipating bony interfer-
ences, osteotomy orientation and an idea of the condylar
position.
http://dx.doi.org/10.1016/j.ijom.2017.02.127




